Product
Test Reagent
SARS-Cov-2 One Step Rapid Test Solution
Wear appropriate personal protective equipment (e.g. gowns, gloves, goggles) when handling the contents of this kit.Precautions
1.For in vitro diagnostic use only.
2.For single use only.
3.Do not use expired strip.
4.Do not use the kit if the pouch is punctured or not well sealed.
5.All specimens should be treated as capable of transmitting diseases. Use appropriate precautions in the collection, handling, storage and disposal of patient samples and used kit contents
6.Wear appropriate personal protective equipment (e.g. gowns, gloves, goggles) when handling the contents of this kit.
7.Testing should be applied by professionally trained staff working in certified laboratories or clinics where the sample is taken by qualified medical personnel.
8.Avoid high temperature test condition. Product which store at low temperature need to equilibrate to room temperature before take out it from foil bag to avoid getting damp.
9.The intensity of color can’t be used to judge antibody titer level in sample.
10.Treat used strip as a potential biological risk. Dispose used test strips in appropriate container.
11.Do not swallow desiccant in foil bag. Keep away from children.
12.The final diagnosis result should be judged by the doctor based on various detection indicators and clinical symptoms
Test Method
Read the package insert carefully before test.
1.Preparation:
a.Allow the test strip and samples to equilibrate to room temperature before testing.
b.Check expiry date of strip. Do not use test strip which beyond expiry date printed on the label.
c.Take out a strip from foil bag and place it on a dry level surface.
2.Test:
a.Adding sample:
Insert dropper slantwise into blood collection tube (within 0.5cm), gently touch sample to absorb sample. Dropper will absorb sample automatically until it reaches to scale mark on dropper (10μL). Do not
press top of dropper when absorb samples. Then use dropper gently touch sampling area on strip, gently squeeze the top of dropper to adding all the sample.
b.Gently squeeze the dropping bottle of sample diluent, add 2~3drops diluent vertically into sampling area (see picture 1).
